| 六角护坡模具制作工艺 |
| 添加时间：2019/5/30 16:33:40 浏览次数： |
| 六角护坡模具制作工艺 Manufacturing Technology of Hexagonal Slope Protection Mould 六角护坡模具采用pp的材质，pp具有很好的韧性，可溶性和可塑性， 塑料颗粒高温下化成液态，是液体流入特定好的铁模具中，利用液态水循环使其冷却，塑料就根据铁模具的规格而塑型，当然铁模具是根据每个客户的图纸特定的，从而产生六角护坡模具各种尺寸。 Hexagonal slope protection mold is made of PP material, PP has good toughness, solubility and plasticity. Plastic particles turn into liquid at high temperature. It is liquid that flows into specific good iron mold. It is cooled by circulating liquid water. Plastics are shaped according to the specifications of iron mold. Of www.fangfugangguan.cn www.naimoguandao.net.cn www.tusugangguan.net.cn www.duanjianchang.cn www.lianjieqii.cn www.lianjieqii.com.cncourse, iron mold is specific according to the drawings of each customer, thus producing various sizes of hexagonal slope protection mold. 六角护坡模具成型后，加入一定配比的水泥（混凝土），24小时左右托模，成品跟模具的尺寸规格一样。简单便捷。 After the hexagonal slope protection mold is formed, a certain proportion of cement (concrete) is added to support the mold for about 24 hours. The finished product is the same size as the mold. Simple and convenient. |
| 上一页 模具损耗原因 |
| 下一页 传统护坡生态护坡的异同 |
Copyright © 技术支持：遨游网络