| 护坡模具在选择的时候最好注意以下几点: |
| 添加时间：2019/8/12 17:06:16 浏览次数： |
| 护坡模具在选择的时候最好注意以下几点: When choosing slope protection mould, the following points should be paid attention to: 1、不要过于比较价格,买便宜的模具不如买耐用的模具,这样可以减少产品不合格的风险。 1. Don't compare prices too much. It's better to buy cheap moulds than durable ones. This can reduce the risk of unqualified products. 2、粉碎回料做的护坡模具,表面上会有很多黑点,浑浊不光亮,加力变形大。 2. There will be many black spots on the surface of the slope protection mould made of crushing and recycling material, which is muddy and not bright, and has large afterburning deformation. 3、护坡模具的外观要精美,护坡模具外观上不要有太多的飞边毛刺和刀销的痕迹。凡是外观粗糙的产品,质量也不好到哪去。 3. The appearance of slope protection mould should be exquisite. There should not be too many flying burrs and knife pins on the appearance of slope protection mould. The quality of products with rough appearance is not good enough. 4、在购买护坡模具时最好到专业生产护坡模具的厂家。 4. When purchasing slope protection moulds, it is better to go to a manufacturer specializing in the production of slope protection moulds. |
| 上一页 护坡塑料模具鉴定方法 |
| 下一页 塑料模具的工作条件 |
Copyright © 技术支持：遨游网络