| 护坡模具的选材大部分选择塑料模具 |
| 添加时间：2022/3/16 15:44:40 浏览次数： |
| 护坡模具的选材大部分选择塑料模具，或者说聚丙烯pp为原料的 The material selection of slope protection moulds mostly uses plastic moulds, or polypropylene PP as raw materials. 高速高铁护坡模具高速高铁护坡模具 High Speed High Speed Rail Slope Protection Mould High Speed High Speed Rail Slope Protection Mould ，同时极少数的选择为abs，塑料模具本身带有了自己独特的特点，可能是它的颜色，纯原料的通常为白色，如果掺有杂质，颜色会有变化，变得发黄，下来就怎么选择厂家呢，到底什么样的厂家，才是更加贴合我们的呢?模具厂一般都有十几年的经验，不管是模具的种类，还是规模都要有一定的显现。有实体的模具厂，比较正规，放心选择。 At the same time, a very few choices are abs. The plastic mould itself has its own unique characteristics. It may be its color. The pure raw material is usually white. If there are impurities, the color will change and become yellow. How to choose the manufacturer? What kind of manufacturer is more suitable for us? The mould factory generally has more than ten years of experience, no matter it is the mould. Types and scales should be shown to a certain extent. Solid mold factory, more formal, assured choice. 在选择的时候最好注意以下几点: When choosing, it is best to pay attention to the following points: 1、不要过于比较价格,买便宜的模具不如买耐用的模具,这样可以减少产品不合格的风险。 1. Don't compare prices too much. It's better to buy cheap moulds than durable ones. This can reduce the risk of unqualified products. 2、粉碎回料做的护坡模具,表面上会有很多黑点,浑浊不光亮,加力变形大。 2. There will be many black spots on the surface of the slope protection mould made of crushing and recycling material, which is muddy and not bright, and has large afterburning deformation. 3、护坡模具的外观要精美,护坡模具外观上不要有太多的飞边毛刺和刀销的痕迹。凡是外观粗糙的产品,质量也不好到哪去。 3. The appearance of slope protection mould should be exquisite. There should not be too many flying burrs and knife pins on the appearance of slope protection mould. The quality of products with rough appearance is not good enough. 4、在购买护坡模具时最好到专业生产护坡模具的厂家。 4. When purchasing slope protection moulds, it is better to go to a manufacturer specializing in the production of slope protection moulds. |
| 上一页 六角护坡块模具具有超强的耐磨性 |
| 下一页 生态护坡砖模具一般采用PP原料 |
Copyright © 技术支持：遨游网络